Title
NEEVIA
docCreator v5.1
API Reference
Table of Contents
Neevia docCreator API Reference
Conversion parameters - GENERAL
Conversion parameters - PostScript/EPS related
Conversion parameters - Image related
Conversion parameters - PDF/A related
Conversion parameters - PDF related
Conversion parameters - PDF Encryption
Conversion parameters - PDF viewer options
Conversion parameters - Watermark/Stationery
Conversion parameters - mergePDF / mergeMultiplePDF related
Conversion parameters - splitPDF related
Conversion parameters - mergePDF, mergeMultiplePDF, splitPDF related
Conversion parameters - convertImage related
Appendix B: Variables supported by Text / TextBox stamps
Appendix C: Paper sizes supported by PaperSize property
License
NEEVIA TECHNOLOGY
ELECTRONIC END USER LICENSE AGREEMENT
For One (1) Computer/Server/Virtual Server
This is an End User License Agreement. This is a contract. If you install this software, you must abide by the terms of this agreement. This license is applicable to all software products sold by Neevia Technology (Neevia). The term software includes upgrades, modified versions or updates. This software is licensed and not sold. Only a personal, non-transferable and nonexclusive right to use the Neevia products is granted to the end user.
The following are definitions that should be noted by the user:
a. SERVER
This is a single computer owned, rented or leased by a single individual or entity on which one or more applications load and execute software in the memory space of that computer. Software is installed on a server for one or more users. All servers must be licensed to utilize Neevia software.
b. VIRTUAL SERVER
This is a single computer or a virtual machine (a software implementation of a machine that executes programs like a physical machine) that is owned, rented or leased by an individual or entity that turns around and rents or leases access to others. The virtual server may have one or more applications on it for the end users to use. The purpose of the virtual server is to give multiple users access to many software programs.
c. DEVELOPMENT
This means that you are programming a specific application or tool that will interact with the software that you are licensing from Neevia Technology.
THIS IS A CONTRACT BETWEEN YOU AND NEEVIA TECHNOLOGY. YOU SHOULD CAREFULLY READ THIS LICENSING AGREEMENT AND MUST ACCEPT ALL THE TERMS AND CONDITIONS BEFORE INSTALLING THIS NEEVIA SOFTWARE. BY INSTALLING THE SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THE TERMS AND CONDITIONS OF THIS LICENSE. IF YOU DO NOT AGREE TO THE TERMS OF THIS LICENSE, DO NOT INSTALL THE SOFTWARE, AND DO NOT USE THE SOFTWARE. IF YOU VIOLATE THIS AGREEMENT, YOU WILL BE SUBJECT TO LEGAL ACTION BY NEEVIA TECHNOLOGY.
Subject to the payment of applicable license fees, Neevia Technology grants you a nonexclusive right to use its accompanying Neevia software product and related documents (the Software) in the terms and conditions provided as follow:
LICENSE
Until such time as Neevia Technology has issued a valid serial number to you, you may only use this software for a 60-day trial period. You agree to remove any copies of the software after the expiration of the trial period. No license is issued to you until you are issued a valid serial number.
(a) Home Use:
The primary user of each computer on which the Software is installed or used may also install the Software on one home or portable computer. However another person may not use the Software on a secondary computer at the same time the Software on the primary computer is being used.
(b) Server or Network Use:
You may store or install one (1) copy of the SOFTWARE on a storage device, such as a network server, for backup and archival purposes only. A license for the SOFTWARE may not be shared or used concurrently on different computers.
(c) Operating system or Language versions:
If you receive two or more copies of the Software with different operating systems or language versions, the total aggregate number of computers on which all versions of the Software are used may not exceed the Permitted Number of Computers. You may not rent, lease, sublicense, lend or transfer versions or copies of the Software you do not use, or Software contained on any unused media.
(d) Archiving:
You may make one copy of the Software solely for archival purposes. If the Software is an upgrade, you may use the Software only in conjunction with upgraded product. If you receive your first copy of the Software electronically, and a second copy on media afterward, the second copy can be used for archival purposes only.
You agree to surrender your license(s) if you violate this agreement. If you violate this agreement, you will not receive a refund upon termination of this license. You agree not to utilize our software to violate the copyright of any third parties. If you do violate the copyright of a third party utilizing our software, you agree to hold Neevia Technology harmless and will indemnify Neevia Technology for any such activity even if the violation is unintentional.
COPYRIGHT
The Software is owned by Neevia Technology and/or its suppliers, and is protected by the copyright and trademark laws of the United States and related applicable laws. You may not copy the Software except as set forth in the "License" section. Any copies that you are permitted to make pursuant to this Agreement must contain the same copyright and other proprietary notices that appear on or in the Software.
You may not rent, lease, sub-license, transfer, or sell the Software. You may not modify, translate, reverse engineer, decompile, disassemble, or create derivative works based on the Software, except to the extent applicable law expressly prohibits such foregoing restriction. You may use the trademarks to identify the Software owner's name, or to identify printed output produced by the Software. Such use of any trademark does not give you any rights of ownership in that trademark.
NO WARRANTY LICENSED SOFTWARE (S) - "AS IS"
The Software is provided AS IS. NEEVIA TECHNOLOGY AND ITS SUPPLIERS MAKE NO WARRANTIES, EXPRESS OR IMPLIED, AS TO THE MERCHANTABILITY, QUALITY, NONINFRINGEMENT OF THIRD PARTY RIGHTS, FITNESS FOR A PARTICULAR PURPOSE, AND THOSE ARISING BY STATUTE OR OTHERWISE IN LAW OR FROM A COURSE OF DEALING OR USAGE OF TRADE. THE ENTIRE RISK AS TO THE QUALITY, RESULTS BY USING THE SOFTWARE, AND PERFORMANCE OF THE SOFTWARE IS WITH THE END USER. Some states or jurisdictions do not allow the exclusion or limitation of incidental, consequential or special damages, or the exclusion of implied warranties or limitations on how long an implied warranty may last, so the above limitations may not apply to your or your company.
LIMITATION OF REMEDIES AND LIABILITY
NEEVIA TECHNOLOGY OR ITS SUPPLIERS OR RESELLERS SHALL NOT UNDER ANY CIRCUMSTANCE BE LIABLE TO YOU FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST SAVINGS, OR FOR ANY CLAIM BY A THIRD PARTY, ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE, EVEN IF NEEVIA TECHNOLOLGY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.
GENERAL
This Agreement shall be construed, interpreted, and governed by the laws of the State of Florida, excluding the application of its conflicts of law rules. The United Nations Convention on Contracts of the International Sale of Goods will not govern this Agreement. If any part of this Agreement is found void and unenforceable, it will not affect the validity of the rest of the Agreement, which shall remain valid and enforceable according to its terms.
If you need to redistribute this product with your own software products, you need to contact Neevia and negotiate a separate licensing and royalty agreement.
You may not ship, transfer, or export the Software into any country or used in any manner prohibited by any export laws, restrictions or regulations.
UPGRADES
You must be properly licensed to install upgrades to Neevia Software products. Neevia upgrades replace and or supplement the previous product that formed the basis for your eligibility to for the upgrade. You may use the upgrade only in accordance with the terms of this Agreement. Upgrades may not be separated and used on separate computers.
GOVERNEMENT USERS
For United States government users, the Software and associated Documentation are deemed to be “commercial computer software” and “commercial computer documentation”, respectively pursuant to DFAR 227.7202 and FAR 12.212(b) as applicable.
ENTIRE AGREEMENT
You acknowledge that you have read this Agreement, understand it and agree to be bounded by its terms and conditions. It is the complete and exclusive statement of the Agreement between us, which supersedes any proposal or prior agreement, oral or written, and other communication between us relating to the subject matter of this Agreement.
Neevia docCreator API Reference
Neevia docCreator supports conversion through a COM object / .NET assembly.
Class ID: Neevia.docCreator
Example:
VBScript: Set NVDC = CreateObject("Neevia.docCreator")
C#: Neevia.docCreator NVDC = new Neevia.docCreator();
VB.NET: Dim NVDC as New Neevia.docCreator()
NOTE: By default, the .NET assembly can be found in the Program Files (x86)\neevia.com\docCreator\.NET folder;
Methods
doSleep
Suspends execution of the current thread for a specified interval.
Syntax
NVDC.doSleep( sleepTime )
Parameters
sleepTime - specifies the amount of time, in milliseconds, for which to suspend execution.
setParameter
Sets a conversion parameter. (see Conversion parameters for a full list)
Syntax
NVDC.setParameter(paramName, paramValue)
Parameters
paramName - parameter name;
paramValue - parameter value (string);
Example
NVDC.setParameter("DocumentOutputFormat", "PDF")
getParameter
Returns the value of a conversion parameter previously set by the setParameter method.
Syntax
Res = NVDC.getParameter(paramName)
Parameters
paramName - parameter name;
getDefaultPrinter
Returns the default system printer.
Syntax
Res = NVDC.getDefaultPrinter
setDefaultPrinter
Sets the default system printer.
Syntax
Res = NVDC.setDefaultPrinter(printerName)
Parameters
printerName - printer name;
Remarks
Res <> 0 on error.
startPrinting
This method will create a new virtual printer.
Syntax
Res = NVDC.startPrinting
Remarks
Res <> 0 on error.
newPrinterName
Returns the name of the printer created by the startPrinting method.
Syntax
Res = NVDC.newPrinterName
newPortName
Returns the printer port associated with the printer created by the startPrinting method.
Syntax
Res = NVDC.newPortName
stopPrinting
Call this method when your application has completed printing to clear up the virtual printer and the variables that have been created by startPrinting method.
Syntax
Res = NVDC.stopPrinting
Remarks
Res <> 0 on error.
createStaticPrinter
Call this method to create a new system printer based on "Neevia docCreator" printer.
Syntax
Res = NVDC.createStaticPrinter( printerName, printerPort )
Parameters
printerName - printer name;
printerPort - printer port, Ex: "c:\testPort.ps";
Remarks
Res <> 0 on error.
deleteStaticPrinter
Deletes a printer from the system.
Syntax
Res = NVDC.deleteStaticPrinter( printerName )
Parameters
printerName - printer name;
Remarks
Res <> 0 on error.
createPrinterPort
Creates a new printer port.
Syntax
Res = NVDC.createPrinterPort( printerPort )
Parameters
printerPort - printer port, Ex: "c:\testPort.ps";
Remarks
Res <> 0 on error.
deletePrinterPort
Deletes a printer port from the system.
Syntax
Res = NVDC.deletePrinterPort( printerPort )
Parameters
printerPort - printer port, Ex: "c:\testPort.ps";
Remarks
Res <> 0 on error.
getPrinterPort
Returns the printer port associated with a specific printer.
Syntax
Res = NVDC.getPrinterPort( printerName )
Parameters
printerName - printer name;
Remarks
Res <> 0 on error.
setPrinterPort
Associates a printer port with a specific printer.
Syntax
Res = NVDC.getPrinterPort( printerName, printerPort )
Parameters
printerName - printer name;
printerPort - printer port, Ex: "c:\testPort.ps";
Remarks
Res <> 0 on error.
setInputDocument
Specifies the input document (must be PostScript, EPS or PDF) to convert. Use this method together with create method.
Syntax
Res = NVDC.setInputDocument( fileName, filePassword )
Parameters
fileNamer - input file;
filePassword - open password if input is an encrypted PDF file (this parameter is optional);
Remarks
Res <> 0 on error.
create
Call this method to create the output document.
Syntax
Res = NVDC.create
Remarks
Res <> 0 on error.
timeOut
Specifies the timeout period for the create method (in seconds).
Syntax
NVDC.timeOut = 360
Note: Can only be set before calling the Create method.
convertImage
This method converts an image into a different image format - see convertImageParam for supported parameters.
Syntax
Res = NVDC.convertImage( inputFile, outputFile )
Remarks
Res <> 0 on error.
Examples
To convert a JPEG image to a BMP raster image, use NVDC.convertImage "image.jpg", "image.bmp"
To convert a TIFF image to a PostScript, use NVDC.convertImage "image.tif", "document.ps"
To convert a TIFF image to a PDF document, use NVDC.convertImage "image.tif", "document.pdf"
linearizePDF
Optimizes an existing PDF file for fast web view.
Syntax
Res = NVDC.linearizePDF(inFile, outFile)
Parameters
inFile - full path to PDF file to linearize;
outFile - full path to destination file;
deletePDFpages
Deletes pages from a specified PDF document.
Syntax
Res = NVDC.deletePDFpages(inFile, outFile, fromPage, toPage)
Parameters
inFile - full path to PDF file to delete pages from;
outFile - full path to destination file;
fromPage - page number to start with;
toPage - page number to end with;
Remarks
Res<>0 on error.
rotatePDFpages
Rotates page(s) in a specified PDF document.
Syntax
Res = NVDC.rotatePDFpages(inFile, outFile, fromPage, toPage, rotate)
Parameters
inFile - full path to PDF file to rotate pages in;
outFile - full path to the destination file;
fromPage - page number to start with;
toPage - page number to end with;
rotate - rotate by (-270, -90, 0, 90, 180, 270) degrees;
Remarks
Res<>0 on error.
isPDFencrypted
Checks if a PDF file is encrypted.
Syntax
Res = NVDC.isPDFencrypted(filename)
Parameters
filename - path to file;
encryptPDF
Encrypts an existing PDF file.
Note: in the trial version all files will be encrypted with "neevia" as user and "owner" as password.
Syntax
Res = NVDC.encryptPDF(srcFile, destFile)
Parameters
srcFile - full path to the file that needs to be decrypted;
destFile - full path to the decrypted file;
Remarks
Res<>0 on error.
decryptPDF
Decrypts an existing PDF file.
Syntax
Res = NVDC.decryptPDF(srcFile, destFile, userPwd)
Parameters
srcFile - full path to the file that needs to be decrypted;
destFile - full path to the decrypted file;
userPwd - user password to be used in the decoding process;
Remarks
Res<>0 on error.
mergePDF
Merges two PDF files.
Syntax
Res = NVDC.mergePDF(firstFile, secondFile, outFile)
Parameters
firstFile - full path to first PDF file;
secondFile - full path to second PDF file;
outFile - full path to resulting file;
Remarks
Res<>0 on error.
mergeMultiplePDF
Merges multiple PDF files.
Syntax
Res = NVDC.mergeMultiplePDF(filesToMerge, destFile)
Parameters
filesToMerge - PDF files to merge, file names must be separated by +
destFile - output PDF file name;
Example
Res = NVDC.mergeMultiplePDF("c:\t1.pdf+c:\t2.pdf+c:\t3.pdf", "c:\out.pdf")
splitPDF
Splits an existing PDF.
Syntax
Res = NVDC.splitPDF(fileToSplit, destFolder)
Parameters
fileToSplit - path to input PDF file;
destFolder - path to destination folder;
Example
Res = NVDC.splitPDF("c:\t1.pdf", "c:\")
Remarks
Res<>0 on error.
extractPDFpages
Extracts pages from an existing PDF file.
Syntax
NVDC.extractPDFpages(fileIN, fileOUT, extractFROM, extractTO)
Parameters
fileIN - input PDF file name;
fileOUT - output file name;
extractFROM - extract from this page;
extractTO - extract to this page;
Example
Res = NVDC.extractPDFpages("c:\in.pdf", "c:\out.pdf", 1, 4)
(this will extract pages 1,2,3 and 4 from c:\in.pdf into c:\out.pdf)
Remarks
Res<>0 on error.
stampPDF
Stamps/watermarks an existing PDF document.
Syntax
Res = NVDC.stampPDF(fileToStamp, destFile)
Parameters
fileToStamp - path to input PDF file;
destFile - path to output PDF file;
Example
Res = NVDC.stampPDF("c:\in.pdf", "c:\out.pdf")
Remarks
Res<>0 on error.
mergeTIFF
Merges two TIFF files.
Syntax
Res = NVDC.mergeTIFF(firstFile, secondFile, outFile)
Parameters
firstFile - full path to first TIFF file;
secondFile - full path to second TIFF file;
outFile - full path to resulting file;
Remarks
Res<>0 on error.
mergeMultipleTIFF
Merges multiple TIFF files.
Syntax
Res = NVDC.mergeMultipleTIFF(filesToMerge, destFile)
Parameters
filesToMerge - TIFF files to merge, file names must be separated by +
destFile - output TIFF file name;
Example
Res = NVDC.mergeMultipleTIFF("c:\t1.tif+c:\t2.tif+c:\t3.tif", "c:\out.tif")
Remarks
Res<>0 on error.
splitTIFF
Splits an existing TIFF file.
Syntax
Res = NVDC.splitTIFF(fileToSplit, destFolder)
Parameters
fileToSplit - path to input TIFF file;
destFolder - path to destination folder;
Example
Res = NVDC.splitTIFF("c:\t1.tif", "c:\")
Remarks
Res<>0 on error.
extractTIFFpages
Extracts pages from an existing TIFF file.
Syntax
NVDC.extractTIFFpages(fileIN, fileOUT, extractFROM, extractTO)
Parameters
fileIN - input TIFF file name;
fileOUT - output TIFF file name;
extractFROM - extract from this page;
extractTO - extract to this page;
Example
Res = NVDC.extractTIFFpages("c:\in.tif", "c:\out.tif", 1, 4)
(this will extract pages 1,2,3 and 4 from c:\in.tif into c:\out.tif)
Remarks
Res<>0 on error.
getNumPages
Returns the number of pages in the specified PDF/TIFF document.
Syntax
Res = NVDC.getNumPages(fileName)
Parameters
filename - path to file;
getBaseName
Returns the file name (less any file extension) from a path.
Syntax
Res = NVDC.getBaseName(path)
Parameters
path - file path;
getExtensionName
Returns the file extension from file name.
Syntax
Res = NVDC.getExtensionName( filename )
fileExists
Checks if a specified file exists.
Syntax
Res = NVDC.fileExists(fileToCheck)
Parameters
fileToCheck - path to the file to check;
isFileInUse
Checks if a specified file is in use (locked).
Syntax
Res = NVDC.isFileInUse(fileToCheck)
Parameters
fileToCheck - path to the file to check;
fileCopy
Copies a file from source to destination.
Syntax
Res = NVDC.fileCopy(srcFile, destFile)
Parameters
srcFile - path to source file;
destFile - path to destination file;
fileDelete
Deletes a specified file.
Syntax
Res = NVDC.fileDelete(filename)
Parameters
filename - path to the file to delete;
createFolder
Creates a folder.
Syntax
Res = NVDC.createFolder(fldrName)
Parameters
fldrName - folder name;
copyFolder
Copies a folder from source to destination.
Syntax
Res = NVDC.copyFolder(srcFolder, destFolder)
Parameters
srcFolder - source path;
destFolder - destination path;
deleteFolder
Deletes a specified folder and its contents.
Syntax
Res = NVDC.deleteFolder(foldername)
Parameters
foldername - path to the folder to delete;
creatorPath
Returns the path to the docCreator.
Syntax
Res = NVDC.creatorPath
Data Type: String
GUID
Returns an unique identifier.
Syntax
Res = NVDC.GUID
Data Type: String
Conversion parameters - GENERAL
DocumentOutputName
Specifies the output file name (no path and extension). The file extension will be automatically added
depending on the output format.
Syntax
NVDC.setParameter("DocumentOutputName", value)
Data type: String
Note: Can only be set before calling the Create method.
DocumentOutputFolder
Specifies the folder where the output document will go.
Syntax
NVDC.setParameter("DocumentOutputFolder", value)
Data type: String
Note: Can only be set before calling the Create method.
DocumentOutputFormat
Sets the output format.
Possible values: "PDF", "PDFA", “PDFA2”, “PDFA3”, “PDFA2U”, “PDFA3U” "PS", "EPS", "PNG", "BMP", "JPG", "TIFF", "PCX", "PSD", "PXL", "TEXT".
Syntax
NVDC.setParameter("DocumentOutputFormat", value)
Data type: String
Note: Can only be set before calling the Create method.
Note: when PDFA is specified the output will be PDF/A-1b. To obtain a PDF/A-2b or 3b file you’ll have to use
PDFA2 or PDFA3. In case you need to create PDF/A files with text that contains Unicode equivalents please use
PDFA2U or PDFA3U.
Known limitations:
TXT output format
The text extraction can be successful only if the printed document itself contains text information. If the document is an image, drawing, metafile, etc, docCreator will not be able to extract any text.
In some cases the printing application sends the text or parts of the text as glyphs. The glyphs codes cannot be converted back to character codes and the text file will contain unreadable characters.
The coordinates of the beginning text are reported by the printing application. The coordinates of the end of the text is calculated by the driver, based on the resolution, font, and the actual characters in the text. A small variation of 1 to 5 pixels is normal.
The coordinates of the text are saved as they are received from the printing application. Some applications, such as Quicken, change the coordinate system during printing. The part of the driver which generates the text output is not aware of this fact. In cases where the printing application changes the coordinate system, the coordinates saved to the text file may not be relative to the upper left corner of the image. There is no workaround for this issue.
When printing content of cells from Excel, the content of the cells is not separated.
Words cut in half. It is possible that the following line "This is a test line" is extracted from a document by docCreator and is saved to the text file as "T his is a te st lin e". This issue is caused by the printing application, which sends the text as different commands. The printer driver is not aware if the text is "correct", the text will be saved exactly how it is received from the printing application. This is most likely to happen with applications such as Word and Notepad, when for example one part of a word or sentence is using one font and another part of the text is using a different font, or a word was typed and then later edited.
When printing a document with Arabic text document with Unicode Text enabled, the Arabic text in the text output is garbage. The origin of the problem is that some languages use fonts that require shaping. Arabic is one of these. When an application prints Arabic text, no printer driver will receive the text itself but instead receives an array of glyph indices. The glyph index is font specific and points to a character location in the font. Because there is no way to convert back the glyph index into a Unicode character code, it is not possible to retrieve the Unicode text. It is caused by the design of the operating systems way of handling printing these kinds of fonts. This problem is found in all printer drivers that capture text, including the docCreator.
FirstPage
Specifies the first page to start the conversion with.
Syntax
NVDC.setParameter("FirstPage", value)
Data type: String
Note: Can only be set before calling the Create method.
LastPage
Specifies the last page to be converted.
Syntax
NVDC.setParameter("LastPage", value)
Data type: String
Note: Can only be set before calling the Create method.
UseCropBox
Specifies whether docCreator should use CropBox for paper size rather than MediaBox when converting PDF files.
Possible values: "true", "false".
Syntax
NVDC.setParameter("UseCropBox", value)
Data Type: String
Note: Can only be set before calling the Create method.
CropEPS
Specifies whether docCreator should crop the EPS/PostSCript files to the bounding box.
Possible values: "true", "false".
Syntax
NVDC.setParameter("CropEPS", value)
Data Type: String
Note: Can only be set before calling the Create method.
UseSystemFonts
Sets the output format.
Possible values: "0" - use only built-in fonts (the missing fonts will be substituted with Helvetica); "1" - use the font mapping file created during docCreator install to locate missing fonts;
"2" - scan the <system>\fonts\ folder for missing fonts (very slow);
Syntax
NVDC.setParameter("UseSystemFonts", value)
Data type: String
Note: Can only be set before calling the Create method.
Conversion parameters - PostScript/EPS related
LanguageLevel
Specifies what PostScript language level docCreator should use when generating the output file. Possible values: "1" (PostScript language level 1),
"1.5" (PostScript language level 1.5),
"2" (PostScript language level 2),
"3" (PostScript language level 3).
Syntax
NVDC.setParameter("LanguageLevel", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PS" or "EPS".
Conversion parameters - Image related
TIFFType
Sets image type when output format is "TIFF".
Possible values:
"tiff24nc", (Color - 24bits RGB output, uncompressed)
"tiff32nc", (Color - 32bits CMYK output, uncompressed)
"tiff24lzw", (Color - 24bits RGB, LZW-compatible compression)
"tiff32lzw", (Color - 32bits CMYK, LZW-compatible compression)
"tiff24zip", (Color - 24bits RGB, ZIP (Deflate) compression)
"tiff32zip", (Color - 32bits CMYK, ZIP (Deflate) compression)
"tiffgray", (Grayscale - 8bits output, uncompressed)
"tiffgraylzw", (Grayscale - 8bits output, LZW-compatible compression)
"tiffgrayzip", (Grayscale - 8bits output, ZIP (Deflate) compression)
"tiffg3", (B&W - G3 fax encoding with EOLs)
"tiffg32d", (B&W - 2-D G3 fax encoding)
"tiffg4", (B&W - G4 fax encoding)
"tifflzw", (B&W - LZW-compatible compression)
"tiffpack". (B&W - PackBits compression)
Syntax
NVDC.setParameter("TiffType", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "TIFF".
MultiPageTIFF
Specifies whether docCreator should create multipage tiff files.
Possible values:
"true" (creates a multipage tiff file)
"false" (creates a tiff file for the each page in the input document)
Syntax
NVDC.setParameter("MultiPageTIFF", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "TIFF".
FillOrder
Sets fill order for the TIFF output format.
Possible values: "0" msb-to-lsb, "1" lsb-to-msb.
Syntax
NVDC.setParameter("FillOrder", value)
Data type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "TIFF".
JPGType
Sets image type when output format is "JPG".
Possible values:
"jpeg", (Color - 16m colors RGB output)
"jpegcmyk", (Color - CMYK output)
"jpeggray". (Grayscale output)
Syntax
NVDC.setParameter("JPGType", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "JPG".
JPGQuality
Sets image quality when output format is "JPG".
Possible values: "1"..."100".
Syntax
NVDC.setParameter("JPGQuality", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "JPG".
BMPType
Sets image type when output format is "BMP".
Possible values:
"bmp16m", (Color - 16m colors RGB output)
"bmp16", (Color - 16 colors RGB output)
"bmp256", (Color - 256 colors RGB output)
"bmpgray", (Grayscale output)
"bmpmono". (Monochrome output)
Syntax
NVDC.setParameter("BMPType", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "BMP".
PSDType
Sets image type when output format is "PSD".
Possible values:
"psdrgb", (Color - 24bits RGB output)
"psdcmyk". (Color - 32bits CMYK output)
Syntax
NVDC.setParameter("PSDType", value)
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PSD".
PCXType
Sets image type when output format is "PCX".
Possible values:
"pcx24b", (Color - 24bits RGB output)
"pcx16", (Color - 16 colors RGB output)
"pcx256", (Color - 256 colors RGB output)
"pcxcmyk", (Color - CMYK output)
"pcxgray", (Grayscale output)
"pcxmono". (Monochrome output)
Syntax
NVDC.setParameter("PCXType", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PCX".
PNGType
Sets image type when output format is "PNG".
Possible values:
"png16m", (Color - 16m colors output)
"png16", (Color - 16 colors output)
"png256", (Color - 256 colors output)
"pnggray", (Grayscale output)
"pngmono". (Monochrome output)
Syntax
NVDC.setParameter("PNGType", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PNG".
PXLType
Sets image type when output format is "PXL".
Possible values:
"pxlcolor", (Color - 24bits RGB output)
"pxlmono", (Monochrome output)
Syntax
NVDC.setParameter("PXLType", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PXL".
ScalePage
Specifies whether docCreator should scale the output document. If ScalePage is "false" output document will be stripped to ImgHeight/ImgWidth, if ScalePage is "true" output document will be scaled to ImgHeight/ImgWidth.
Syntax
NVDC.setParameter("ScalePage", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if DocumentOutputFormat is "TIFF", "JPG", "BMP", "PNG" or "PCX".
ConstrainProportions
Specifies whether docCreator should constrain proportions when scaling the output document.
Possible values: "true", "false"
Syntax
NVDC.setParameter("ConstrainProportions", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if DocumentOutputFormat is "TIFF", "JPG", "BMP", "PNG" or "PCX" and ScalePage is "true".
ScaleIfLarger
Instructs docCreator to perform scaling only if the input document is larger than the output. Possible values: "true", "false"
Syntax
NVDC.setParameter("ScaleIfLarger", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if DocumentOutputFormat is "TIFF", "JPG", "BMP", "PNG" or "PCX" and ScalePage is "true".
PlaceContentIn
Specifies where docCreator should place the original page content on the scaled page.
Possible values: "0" (left-bottom corner), "1" (right-bottom corner), "2" (center), "3" (center-top),
"4" (center-bottom), "5" (left-center), "6" (right-center), "7" (left-top corner),
"8" (right-top corner)
Syntax
NVDC.setParameter("PlaceContentIn", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if DocumentOutputFormat is "TIFF", "JPG", "BMP", "PNG" or "PCX" and ScalePage is "true".
ImgHeight
Specifies the output document height (in pixels).
Syntax
NVDC.setParameter("ImgHeight", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if DocumentOutputFormat is "TIFF", "JPG", "BMP", "PNG" or "PCX".
ImgWidth
Specifies the output document width (in pixels).
Syntax
NVDC.setParameter("ImgWidth", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if DocumentOutputFormat is "TIFF", "JPG", "BMP", "PNG" or "PCX".
ImgResH
Specifies the output document horizontal resolution (in dpi).
Syntax
NVDC.setParameter("ImgResH", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if DocumentOutputFormat is "TIFF", "JPG", "BMP", "PNG" or "PCX".
ImgResV
Specifies the output document vertical resolution (in dpi).
Syntax
NVDC.setParameter("ImgResV", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if DocumentOutputFormat is "TIFF", "JPG", "BMP", "PNG" or "PCX".
FileNameSuffix
Specifies the output filename suffix. If you use "%d" docCreator will add the page number to the file name. You can also control the number of digits used in the file name by replacing %d with %0Nd where N is the number of digits you want to use, for example %03d will force docCreator to produce files with names like this: 'filename001.jpg', ... , 'filename010.jpg', ... %04d will produce: 'filename0001.jpg', ... , 'filename0010.jpg', ...
Syntax
NVDC.setParameter("FileNameSuffix", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if DocumentOutputFormat is "TIFF", "JPG", "BMP", "PNG" or "PCX".
TextAlphaBits
Controls the use of subsample antialiasing for text content. The subsampling box size should be 4 bits for optimum output, but smaller values can be used for faster rendering.
Possible Values: "0", "1", "2", "4"
Syntax
NVDC.setParameter("TextAlphaBits", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if DocumentOutputFormat is "TIFF", "JPG", "BMP", "PNG" or "PCX".
GraphicsAlphaBits
Controls the use of subsample antialiasing for graphics content. The subsampling box size should be 4 bits for optimum output, but smaller values can be used for faster rendering.
Possible Values: "0", "1", "2", "4"
Syntax
NVDC.setParameter("GraphicsAlphaBits", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if DocumentOutputFormat is "TIFF", "JPG", "BMP", "PNG" or "PCX".
Because of the way antialiasing blends the edges of shapes into the background when they are drawn, some files that rely on joining separate filled polygons together to cover an area may not render as expected with Graphics antialiasing at 2 or 4 bits. If you encounter strange lines within solid areas, try rendering that file again with Graphic antialiasing at 1 bit.
Interpolate
Specifies whether the image parser should use image interpolation. Enabling image interpolation will result in higher quality for scaled images at the expense of speed.
Possible Values: "true", "false"
Syntax
NVDC.setParameter("Interpolate", value)
Data Type: String
UseWTS
Specifies whether Well Tempered Screening algorithm should be used for halftoning.
Possible Values: "true", "false"
Syntax
NVDC.setParameter("UseWTS", value)
Data Type: String
Note: the Well Tempered Screening algorithm is used for halftoning. If not enabled a rational tangent algorithm is chosen, which will typically result in significant differences between the screen angle and ruling requested, and actually rendered. Currently, the performance of WTS is reasonably good when rendering to a full page buffer, but not optimized for banded mode.
UseCIEColor
Specifies whether the image parser should remap the device-dependent color values through a CIE color space. This can improve the conversion of CMYK documents to RGB.
Possible Values: "true", "false"
Syntax
NVDC.setParameter("UseCIEColor", value)
Data Type: String
DitheringMethod
Specifies the dithering algorithm docCreator should use when producing B&W FAX TIFF files.
Possible Values: "0" (sierra), "1" (burkes), "2" (stucki), "3" (floyd), "4" (jarvis), "5" (cluster 6x6), "6" (cluster 8x8),
"7" (cluster 16x16), "8" (bayer 4x4), "9" (bayer 8x8)
Syntax
NVDC.setParameter("DitheringMethod", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if DocumentOutputFormat is "FAX" or "SEND VIA FAX".
Conversion parameters - PDF/A related
OutputIntent
Specifies the PDF/A Output Intent.
Possible values: "srgb", "jc200103", "fogra27", "swop", "gray".
Syntax
NVDC.setParameter("OutputIntent", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDFA".
Conversion parameters - PDF related
PDFtoPDF
Specifies whether the PDF document set by the setInputDocument method has to be reparsed when converting into PDF.
Possible values: "true", "false".
Syntax
NVDC.setParameter("PDFtoPDF", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
PDFMarksFile
Specifies the file to load PDFmark commands from.
Syntax
NVDC.setParameter("PDFMarksFile", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
LinearizePDF
Specifies whether the output PDF document should be linearized (optimized for fast web view).
Possible values: "true", "false".
Syntax
NVDC.setParameter("LinearizePDF", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
AttachOriginalFile
Specifies whether original file should be included as attachment in the output PDF.
Possible values: "true", "false"
Syntax
NVDC.setParameter("AttachOriginalFile", value)
Data Type: String
OptimizePDFfor
Possible values: "default", "screen", "printer", "prepress", "ebook".
For your convenience there are several sets of predefined settings for creating PDF files. These settings are designed to balance file size with quality, depending on how the PDF file is to be used:
• Default - is intended to be useful across a wide variety of uses, possibly at the expense of a larger output file. All color and grayscale images are downsampled at 72 dpi, monochrome images at 300 dpi; subsets of all fonts used in the file are embedded; and all information is compressed. PDF files created using the Default job option are compatible with Acrobat 4.0 (and later).
• Screen - intended for PDF files that will be displayed on the World Wide Web or an intranet, or that will be distributed through an e-mail system for on-screen viewing. This set of options uses compression, downsampling, and a relatively low resolution; converts all colors to RGB; maintains compatibility with Acrobat 3.0; to create a PDF file that is as small as possible. It also optimizes files for byte serving (fast web view).
• Printer - to be used for PDF files that are intended for desktop printers, digital copiers, publishing on a CD-ROM, or to send to a client as a publishing proof. In this set of options, file size is still important, but it is not the only objective. This set of options uses compression and downsampling to keep the file size down, but it also embeds subsets of all fonts used in the file, tags everything for color management, and prints to a medium resolution to create a reasonably accurate rendition of the original document.
• Prepress - intended for PDF files that will be printed as a high-quality final output to an imagesetter or, for example, a platesetter. In this case, file size is not a consideration. The objective is to maintain all the information in a PDF file that a commercial printer or service bureau will need to print the document correctly. This set of options downsamples color and grayscale images at 300 dpi, monochrome images at 1200 dpi, embeds subsets of all fonts used in the file, prints to a higher resolution, and uses other settings to preserve the maximum amount of information about the original document.
Syntax
NVDC.setParameter("OptimizePDFfor", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
DocumentResolution
Sets the output document resolution.
Possible values: "10"..."2400".
Syntax
NVDC.setParameter("DocumentResolution", value)
Data Type: String
Note: Can only be set before calling the Create method.
DocumentPaperSize
Sets the output document paper size. Use x to separate width and height. For example 10inx20in will specify an output paper size with 10 inches in width and 20 inches in height.
Syntax
NVDC.setParameter("DocumentPaperSize", value)
Example - set the output document paper size to 8x11 inches
NVDC.setParameter("DocumentPaperSize", "8inx11in")
Example - set the output document paper size to 100x200 millimeters
NVDC.setParameter("DocumentPaperSize", "100mmx200mm")
Example - set the output document paper size to 3x5 centimeters
NVDC.setParameter("DocumentPaperSize", "3cmx5cm")
Data Type: String
Note: Can only be set before calling the Create method.
ScalePage
Specifies whether docCreator should scale the output document. If ScalePage is "false" output document will be stripped to DocumentPaperSize, if ScalePage is "true" output document will be scaled to DocumentPaperSize.
Syntax
NVDC.setParameter("ScalePage", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if DocumentOutputFormat is "PDF".
ConstrainProportions
Specifies whether docCreator should constrain proportions when scaling the output document.
Possible values: "true", "false"
Syntax
NVDC.setParameter("ConstrainProportions", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if DocumentOutputFormat is "PDF" and ScalePage is "true".
PlaceContentIn
Specifies where docCreator should place the original page content on the scaled page.
Possible values: "0" (left-bottom corner), "1" (right-bottom corner), "2" (center), "3" (center-top),
"4" (center-bottom), "5" (left-center), "6" (right-center), "7" (left-top corner),
"8" (right-top corner)
Syntax
NVDC.setParameter("PlaceContentIn", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if DocumentOutputFormat is "PDF".
PDFVersion
Sets the compatibility level (a.k.a. PDF version) of the output PDF document.
Possible values: "1.3" (Acrobat 4-and-later compatible)
"1.4" (Acrobat 5-and-later compatible)
"1.5" (Acrobat 6-and-later compatible)
"1.6" (Acrobat 7-and-later compatible)
"1.7" (Acrobat 8-and-later compatible)
"2.0" (Acrobat 2.0 compatible)
Syntax
NVDC.setParameter("PDFVersion", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
DocumentTitle
Sets the title field in the output PDF document.
Syntax
NVDC.setParameter("DocumentTitle", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
DocumentSubject
Sets the subject field in the output PDF document.
Syntax
NVDC.setParameter("DocumentSubject", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
DocumentAuthor
Sets the author field in the output PDF document.
Syntax
NVDC.setParameter("DocumentAuthor", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
DocumentKeywords
Sets the keywords field in the output PDF document.
Syntax
NVDC.setParameter("DocumentKeywords", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
PDFAutoRotatePage
Specifies whether docCreator should automatically rotate pages based on the orientation of the text.
Possible values: "None" (will disable the Auto-Rotate Pages option)
"PageByPage" (will rotate each page based on the direction of the text on that page)
"All" (will rotate all pages in the document based on the orientation of the majority of text)
Syntax
NVDC.setParameter("PDFAutoRotatePage", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
PDFCompressPages
Specifies whether text and line art in the output PDF document should be compressed.
Possible values: "true", "false"
Syntax
NVDC.setParameter("PDFCompressPages", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
PDFEmbedAllFonts
Specifies whether fonts in the output PDF document should be embedded.
Possible values: "true", "false"
Syntax
NVDC.setParameter("PDFEmbedAllFonts", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
PDFSubsetFonts
Indicates whether to include in the output PDF document only the font characters that are used in the original document.
Possible values: "true", "false"
Syntax
NVDC.setParameter("PDFSubsetFonts", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
PDFFontsMaxSubset
Sets the Subset Fonts threshold. If the percentage of used characters (compared with total characters of the particular font) exceeds this threshold, the entire font is embedded.
Possible values: "0"..."100".
Syntax
NVDC.setParameter("PDFFontsMaxSubset", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
PDFProcessColorModel
Sets the color model for the output PDF document.
Possible values: "DeviceRGB", "DeviceCMYK", "DeviceGRAY", "LeaveUnchanged"
Syntax
NVDC.setParameter("PDFProcessColorModel", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
CompressColorImages
Specifies whether the color images in the output PDF document should be compressed.
Possible values: "true", "false"
Syntax
NVDC.setParameter("CompressColorImages", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
ColorCompressMethod
Sets the compression method for color images in the output PDF document.
Possible values: "Automatic", "JPEG-maximum", "JPEG-high", "JPEG-medium", "JPEG-low",
"JPEG-minimum", "ZIP".
Syntax
NVDC.setParameter("ColorCompressMethod", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
CompressGrayImages
Specifies whether gray images in the output PDF document should be compressed.
Possible values: "true", "false"
Syntax
NVDC.setParameter("CompressGrayImages", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
GrayCompressMethod
Sets the compression method for gray images in the output PDF document.
Possible values: "Automatic", "JPEG-maximum", "JPEG-high", "JPEG-medium", "JPEG-low",
"JPEG-minimum", "ZIP".
Syntax
NVDC.setParameter("GrayCompressMethod", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
CompressMonoImages
Specifies whether monochrome images in the output PDF document should be compressed.
Possible values: "true", "false"
Syntax
NVDC.setParameter("CompressMonoImages", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
MonoCompressMethod
Sets the compression method for monochrome images in the output PDF document.
Possible values:
"CCITT" (compress monochrome images using the CCITT group 4-fax compression)
"ZIP" (compress monochrome images using ZIP-compatible compression)
Syntax
NVDC.setParameter("MonoCompressMethod", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
ColorImageResolution
Sets the resolution level for color images in the output PDF document.
Possible values: "10"..."2400".
Syntax
NVDC.setParameter("ColorImageResolution", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
GrayImageResolution
Sets the resolution level for gray images in the output PDF document.
Possible values: "10"..."2400".
Syntax
NVDC.setParameter("GrayImageResolution", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
MonoImageResolution
Sets the resolution level for mono images in the output PDF document.
Possible values: "10"..."2400".
Syntax
NVDC.setParameter("MonoImageResolution", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
DownsampleColorImages
Specifies whether color images in the output PDF document should be downsampled.
Possible values: "true", "false"
Syntax
NVDC.setParameter("DownsampleColorImages", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
ColorImageDownsampleType
Possible values: "Bicubic", "Average", "Subsample".
Syntax
NVDC.setParameter("ColorImageDownsampleType", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
DownsampleGrayImages
Specifies whether gray images in the output PDF document should be downsampled.
Possible values: "true", "false"
Syntax
NVDC.setParameter("DownsampleGrayImages", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
GrayImageDownsampleType
Possible values: "Bicubic", "Average", "Subsample".
Syntax
NVDC.setParameter("GrayImageDownsampleType", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
DownsampleMonoImages
Specifies whether monochrome images in the output PDF document should be downsampled.
Possible values: "true", "false"
Syntax
NVDC.setParameter("DownsampleMonoImages", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
MonoImageDownsampleType
Possible values: "Bicubic", "Average", "Subsample".
Syntax
NVDC.setParameter("MonoImageDownsampleType", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
MaxInlineImageSize
Sets the maximum size of an inline image in bytes.
Default value: "4000"
Syntax
NVDC.setParameter("MaxInlineImageSize", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if DocumentOutputFormat is “PDF”. For images larger than this size, docCreator will create a XObject instead of embedding the image into the context stream. Note that redundant inline images must be embedded each time they occur in the document, while multiple references can be made to a single XObject image. Therefore it may be advantageous to set a small or zero value if the source document is expected to contain multiple identical images, reducing the size of the generated PDF.
ParseDSCComments
Intructs the conversion engine whether to parse PS/EPS DSC comments.
Possible values: "true", "false"
Syntax
NVDC.setParameter("ParseDSCComments", value)
Data Type: String
Note: Can only be set before calling the Create method.
DefaultRenderingIntent
Sets the default rendering intent.
Possible values: "0" (Default)
"1" (Perceptual)
"2" (Saturation)
"3" (RelativeColorimetric)
"4" (AbsoluteColorimetric)
Syntax
NVDC.setParameter("DefaultRenderingIntent", value)
Data Type: String
Note: Can only be set before calling the Create method.
PreserveOverprintSettings
Specifies whether overprint settings should be preserved.
Possible values: "true", "false"
Syntax
NVDC.setParameter("PreserveOverprintSettings", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
UCRandBGInfo
Specifies whether under color removal and black generation settings should be preserved.
Possible values: "true", "false"
Syntax
NVDC.setParameter("UCRandBGInfo", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
TransferFunctionInfo
Specifies whether transfer function information should be preserved.
Possible values: "true", "false"
Syntax
NVDC.setParameter("TransferFunctionInfo", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
PreserveHaltoneInfo
Specifies whether halftone information should be preserved.
Possible values: "true", "false"
Syntax
NVDC.setParameter("PreserveHalftoneInfo", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
Conversion parameters - PDF Encryption
Specifies whether the output PDF document should be encrypted.
Possible values: "true", "false"
Syntax
NVDC.setParameter("PDFEncryption", value)
Data Type: String
Note: Can only be set before calling the Create method.
PDFEncryptionMethod
Sets the encryption method.
Possible values: "40" (low - 40 bits encryption, Acrobat 3-and-later compatible)
"rc4" (high - 128 bits encryption, Acrobat 5-and-later compatible)
"aes" (high - 128 bits encryption, Acrobat 6-and-later compatible)
"aes256" (high - 256 bits encryption, Acrobat 9-and-later compatible)
Syntax
NVDC.setParameter("PDFEncryptionMethod", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
PDFEncryptMeta
Specifies whether metadata in the output PDF file should be encrypted.
Possible values: "true", "false"
Syntax
NVDC.setParameter("PDFEncryptMeta", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
Sets the user password in the output PDF document. Users will be asked to enter this password before Acrobat Reader allows them to view the PDF document.
Syntax
NVDC.setParameter("PDFUserPassword", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
Sets the output document owner password. This option will force the user of the PDF to enter a password before Acrobat Reader allows them to change the user password and security permissions.
Syntax
NVDC.setParameter("PDFOwnerPassword", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
PDFPermissions
Sets PDF security permissions to use for encrypting output file.
Possible values:
"p" - document printing is denied
"c" - changing the document is denied
"s" - selection and copying of text and graphics is denied
"a" - adding or changing annotations (PDF comments) or form fields is denied
The following flags are defined for 128 bits and higher encryption:
"i" - disables editing of form fields
"e" - disables extraction of text and graphics
"d" - disables document assembly
"q" - disables high quality printing
Syntax
NVDC.setParameter("PDFPermissions", value)
Example
NVDC.setParameter( "PDFPermissions", "p" )
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
Conversion parameters - PDF viewer options
Specifies the page at which the output PDF document should open in PDF viewer.
Syntax
NVDC.setParameter("OpenAtpage", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
Specify the open magnification in % for the output document.
Possible values: "0" (Default)
"1" (Actual Size)
"2" (Fit Page)
"3" (Fit Width)
"4" (Fit Height)
"5" (Fit Visible)
"6" (Zoom 25%)
"7" (Zoom 50%)
"8" (Zoom 75%)
"9" (Zoom 100%)
"10" (Zoom 125%)
"11" (Zoom 150%)
"12" (Zoom 200%)
"13" (Zoom 400%)
"14" (Zoom 800%)
"15" (Zoom 1600%)
"16" (Zoom 2400%)
"17" (Zoom 3200%)
"18" (Zoom 6400%)
Syntax
NVDC.setParameter("OpenMagnification", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
Specifies whether Acrobat Reader should maximize the document window and display output PDF documents without the menu bar, toolbar, or window controls.
Possible values: "true", "false"
Syntax
NVDC.setParameter("FullScreen", value)
Data Type: String
Note: take into account that if you hide the menu bar and toolbars users cannot apply commands and select tools unless they know the keyboard shortcuts.
Specifies how output file should be displayed when opened in PDF viewer.
Possible values: "0" Default view
"1" Page only
"2" Outlines (bookmarks) visible
"3" Thumbnail images visible
"4" Optional content group (layers) panel visible
"5" Attachments panel visible
Syntax
NVDC.setParameter("PageMode", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
Specifies page layout to use when output file is opened in PDF viewer.
Possible values: "1" (Display one page at a time)
"2" (Display the pages in one column)
"3" (Display the pages in two columns, with odd numbered pages on the left)
"4" (Display the pages in two columns, with odd numbered pages on the right)
"5" (Display the pages two at a time, with odd numbered pages on the left)
"6" (Display the pages two at a time, with odd numbered pages on the right)
Syntax
NVDC.setParameter("PageLayout", value)
Data Type: String
Note: Can only be set before calling the Create method. Will have effect only if "DocumentOutputFormat" is "PDF".
Specifies whether Acrobat Reader should hide the menu bar when displaying the output PDF document.
Possible values: "true", "false"
Syntax
NVDC.setParameter("HideMenuBar", value)
Data Type: String
Specifies whether Acrobat Reader should hide the toolbar when displaying PDF documents.
Possible values: "true", "false"
Syntax
NVDC.setParameter("HideToolbar", value)
Data Type: String
Specifies whether Acrobat Reader should hide the user interface when displaying PDF documents.
Possible values: "true", "false"
Syntax
NVDC.setParameter("HideWindowUI", value)
Data Type: String
Specifies whether Acrobat Reader should adjust the document window to fit snugly around the opening page when displaying PDF documents.
Possible values: "true", "false"
Syntax
NVDC.setParameter("FitWindow", value)
Data Type: String
Specifies whether Acrobat Reader should position the window in the center of the screen area when displaying PDF documents.
Possible values: "true", "false"
Syntax
NVDC.setParameter("CenterWindow", value)
Data Type: String
Conversion parameters - Watermark/Stationery
StampText
Specifies the text to use as watermark. (See Appendix B for the list of supported variables)
Syntax
NVDC.setParameter("StampText", value)
Data Type: String
StampFile
Specifies the file to load stamp commands from. (See Appendix A for stamp file format info)
Syntax
NVDC.setParameter("StampFile", value)
Data Type: String
Example
NVDC.setParameter( "StampFile", "c:\stamp.nsp" )
Commands contained in stamp.nsp:
\stamp 0
\stampname SampleStamp
\text CONFIDENTIAL
\x center
\y center
\units 1
\fontname Arial
\fontcolor #00FF00
StampFontColor
Specifies the watermark font color.
Syntax
NVDC.setParameter("StampFontColor", value)
Example
NVDC.setParameter( "StampFontColor", "#000000" )
Data Type: String
StampFontName
Specifies the watermark font name.
Syntax
NVDC.setParameter("StampFontName", value)
Example
NVDC.setParameter( "StampFontName", "Arial" )
Data Type: String
StampFontSize
Specifies the watermark font size.
Syntax
NVDC.setParameter("StampFontSize", value)
Example
NVDC.setParameter( "StampFontSize", "40" )
Data Type: String
StampFontEmbed
Specifies whether fonts should be embedded.
Possible values: "true", "false"
Syntax
NVDC.setParameter("StampFontEmbed", value)
Data Type: String
StampFontSubset
Specifies whether fonts should be subset.
Possible values: "true", "false"
Syntax
NVDC.setParameter("StampFontSubset", value)
Data Type: String
StampTextRenderingMode
Specifies the text rendering mode.
Possible values:
"0" - Fill text, no stroke (default)
"1" - Stroke text, no fill
"2" - Fill then Stroke text
"3" - Invisible
 |
 |
 |
Fill text, no stroke Stroke text, no fill Fill then stroke text
Syntax
NVDC.setParameter("StampTextRenderingMode", value)
Data Type: String
StampFontEncoding
Specifies the font encoding.
Syntax
NVDC.setParameter("StampFontEncoding", value)
Data Type: String
StampScale
Specifies by how much (in percent) to scale the stamp. Default value: "100"
Syntax
NVDC.setParameter("StampScale", value)
Example
NVDC.setParameter( "StampScale", "200" )
Data Type: String
Note: will have effect only for Image and PDFOverlay stamps.
StampFontColor
Specifies font color in RGB colorspace.
Syntax
NVDC.setParameter("StampFontColor", value)
Example
NVDC.setParameter( "StampFontColor", "#FF0000" ) (red)
Data Type: String
StampFontColorGray
Specifies font color in Gray colorspace.
Syntax
NVDC.setParameter("StampFontColorGray", value)
Example
NVDC.setParameter( "StampFontColorGray", "#77" )
Data Type: String
StampFontColorCMYK
Specifies font color in CMYK colorspace.
Syntax
NVDC.setParameter("StampFontColorCMYK", value)
Example
NVDC.setParameter( "StampFontColorCMYK", "#000000FF" ) (black)
Data Type: String
StampStrokeColor
Specifies font stroke color in RGB colorspace.
Syntax
NVDC.setParameter("StampStrokeColor", value)
Example
NVDC.setParameter( "StampStrokeColor", "#FF0000" ) (red)
Data Type: String
StampStrokeColorGray
Specifies font stroke color in Gray colorspace.
Syntax
NVDC.setParameter("StampStrokeColorGray", value)
Example
NVDC.setParameter( "StampStrokeColorGray", "#77" )
Data Type: String
StampStrokeColorCMYK
Specifies font stroke color in CMYK colorspace.
Syntax
NVDC.setParameter("StampStrokeColorCMYK", value)
Example
NVDC.setParameter( "StampStrokeColorCMYK", "#000000FF" ) (black)
Data Type: String
StampStrokeWidth
Specifies the stroke width.
Syntax
NVDC.setParameter("StampStrokeWidth", value)
Data Type: String
StampRotate
Specifies the watermark rotation angle in degrees.
Syntax
NVDC.setParameter("StampRotate", value)
Data Type: String
StampOpacity
Specifies watermark opacity (transparency) level.
Possible values: "0" … "100". Default value: "100"
Syntax
NVDC.setParameter("StampOpacity", value)
Data Type: String
PlaceStampOnPages
Specifies the pages to place watermark/stationery on.
Note: page numbers must be separated by commas. To place the watermark/stationery on all pages specify "0".
Syntax
NVDC.setParameter("PlaceStampOnPages", value)
Example
NVDC.setParameter( "PlaceStampOnPages", "1,3,7" )
(will place watermark on pages 1, 3 and 7)
Data Type: String
StampUnits
Specifies measurement unit to use for the StampX and StampY properties.
Possible values: "0" (points), "1" (inches), "2" (centimeters), "3" (millimeters)
Syntax
NVDC.setParameter("StampUnits", value)
Data Type: String
StampX
Specifies the watermark X coordinate.
Syntax
NVDC.setParameter("StampX", value)
Data Type: String
Note: you can use as values, instead of numbers "center", "left" and "right" - as the name suggests they will position the watermark in the center of the page, on the left or right.
StampY
Specifies the watermark Y coordinate.
Syntax
NVDC.setParameter("StampY", value)
Data Type: String
Note: you can use as values, instead of numbers "center", "top" and "bottom" - as the name suggests they will position the watermark in the center of the page, on top or in the bottom.
StampWidth
Specifies the stamp width.
Syntax
NVDC.setParameter("StampWidth", value)
Data Type: String
Note: will have effect only for TextBox and Image stamps.
StampHeight
Specifies the stamp height.
Syntax
NVDC.setParameter("StampHeight", value)
Data Type: String
Note: will have effect only for TextBox and Image stamps.
StampTextBox
Specifies the watermark text to use inside a text box. (See Appendix B for the list of supported variables)
Syntax
NVDC.setParameter("StampTextBox", value)
Data Type: String
StampTextAlign
Specifies how the text to use inside a textbox stamp should be aligned.
Possbile values: "0" (left), "1" (center), "2" (right)
Syntax
NVDC.setParameter("StampTextAlign", value)
Data Type: String
StampWordWrap
Specifies whether to enable Word Wrap in case text does not fit in one line.
Possbile values: "true", "false"
Syntax
NVDC.setParameter("StampWordWrap", value)
Data Type: String
StampWebLink
Specifies the web address to go to when the stamp is clicked.
Syntax
NVDC.setParameter("StampWebLink", value)
Data Type: String
StampGoToPage
Specifies the page number to go to when the stamp is clicked.
Syntax
NVDC.setParameter("StampGoToPage", value)
Data Type: String
StampUseCropBox
Specifies whether to use the page crop box to position stamp.
Possbile values: "true", "false"
Syntax
NVDC.setParameter("StampUseCropBox", value)
Data Type: String
StampUsePageRotation
Specifies whether to use the page rotation parameter when placing stamp.
Possbile values: "true", "false"
Syntax
NVDC.setParameter("StampUsePageRotation", value)
Data Type: String
StampPlaceAs
Specifies how to place stamp on page.
Possible values: "0" as stamp: over page content (Default),
"1" as watermark: under page content
Syntax
NVDC.setParameter("StampPlaceAs", value)
Data Type: String
StampImage
Specifies the image file to use as stamp. Supported formats: GIF, PNG, JPEG, TIFF and BMP.
Syntax
NVDC.setParameter("StampImage", value)
Example
NVDC.setParameter( "StampImage", "c:\image.gif" )
Data Type: String
StampPDFOverlay
Specifies the PDF file to use as stationery.
Syntax
NVDC.setParameter("StampPDFOverlay", value)
Example
NVDC.setParameter( "StampPDFOverlay", "c:\stationery.pdf" )
Data Type: String
StampPDFOverlayPage
Specifies the page to use as overlay from the PDFOverlay file. Default value: "1"
Syntax
NVDC.setParameter("StampPDFOverlayPage", value)
Data Type: String
Conversion parameters - mergePDF / mergeMultiplePDF related
CreatePageBookmarks
Specifies whether bookmarks should be created during merging.
Possible values: "true", "false"
Syntax
NVDC.setParameter("CreatePageBookmarks", value)
Data Type: String
Note: Will have effect only when used in conjunction with the mergePDF method.
CreateNewBookmarks
Specifies whether new bookmarks should be created during merging.
Possible values: "true", "false"
Syntax
NVDC.setParameter("CreateNewBookmarks", value)
Data Type: String
Note: Will have effect only when used in conjunction with mergePDF method.
BookmarksFile
Specifies path to the file that contains the new bookmarks to add while merging files.
Syntax
NVDC.setParameter("BookmarksFile", value)
Data Type: String
Note: Will have effect only when used in conjunction with mergePDF method.
Conversion parameters - splitPDF related
Specifies whether PDF files should be split by bookmarks.
Possible values: "true", "false"
Syntax
NVDC.setParameter("SplitByBookmarks", value)
Data Type: String
Note: Will have effect only when used in conjunction with splitPDF method.
Specifies the lowest bookmark level to split by.
Default value: "1"
Syntax
NVDC.setParameter("BkLevel", value)
Data Type: String
Note: Will have effect only when used in conjunction with splitPDF method and SplitByBookmarks = true.
Specifies whether to name output PDF file(s) according to bookmark titles.
Possible values: "true", "false"
Syntax
NVDC.setParameter("nameByBk", value)
Data Type: String
Note: Will have effect only when used in conjunction with splitPDF method and SplitByBookmarks = true.
Conversion parameters - mergePDF, mergeMultiplePDF, splitPDF related
Specifies whether to remove text annotations from the output PDF file(s).
Possible values: "true", "false"
Syntax
NVDC.setParameter("RemoveAnnotations", value)
Data Type: String
Note: Will have effect only when used in conjunction with splitPDF or mergePDF methods.
Specifies whether to remove PDF forms from the output PDF file(s).
Possible values: "true", "false"
Syntax
NVDC.setParameter("RemoveAcroForms", value)
Data Type: String
Note: Will have effect only when used in conjunction with splitPDF or mergePDF methods.
Specifies whether to remove page labels from the output PDF file(s).
Possible values: "true", "false"
Syntax
NVDC.setParameter("RemovePageLabels", value)
Data Type: String
Note: Will have effect only when used in conjunction with splitPDF or mergePDF methods.
Specifies whether to remove layers from the output PDF file(s).
Possible values: "true", "false"
Syntax
NVDC.setParameter("RemoveLayers", value)
Data Type: String
Note: Will have effect only when used in conjunction with splitPDF or mergePDF methods.
Specifies whether to remove article threads from the output PDF file(s).
Possible values: "true", "false"
Syntax
NVDC.setParameter("RemoveArticleThreads", value)
Data Type: String
Note: Will have effect only when used in conjunction with splitPDF or mergePDF methods.
Conversion parameters - convertImage related
Specifies how docCreator should handle image rotation/orientation.
Possible Values: "0" (preserve original), "1" (rotate landscape images 90 degrees), "2" (rotate landscape images -90 degrees), "3" (rotate portrait images 90 degrees), "4" (rotate portrait images -90 degrees)
Syntax
NVDC.setParameter("ImageRotate", value)
Data Type: String
Note: Will have effect only when used in conjunction with convertImage method.
Specifies whether docCreator should perform OCR (Optical Character Recognition) when converting images to PDF.
Possible values: "true", "false"
Syntax
NVDC.setParameter("OCR", value)
Data Type: String
Note: Will have effect only when used in conjunction with convertImage method.
Sets the OCR language.
Possible Values: "0" English, "1" Czech, "2" Danish, "3" Dutch, "4" Finnish, "5" French, "6" German,
"7" Greek, "8" Hungarian, "9" Italian, "10" Japanese, "11" Korean, "12" Norwegian,
"13" Polish, "14" Portuguese, "15" Russian, "16" Spanish, "17" Swedish, "18" Turkish,
"19" Chinese Traditional, "20" Chinese Simplified
Syntax
NVDC.setParameter("OCRlang", value)
Data Type: String
Note: Will have effect only when used in conjunction with convertImage method and "OCR" = "true".
Specifies whether the OCR engine should attempt to determine the orientation of the page.
Possible Values: "true", "false"
Syntax
NVDC.setParameter( "AutoRotate", value)
Data Type: String
Note: Will have effect only when used in conjunction with convertImage method and "OCR" = "true".
Specifies whether the OCR engine should attempt to "de-skew" the page to correct for small angles of misalignment from the vertical.
Possible Values: "true", "false"
Syntax
NVDC.setParameter("AutoStraighten", value)
Data Type: String
Note: Will have effect only when used in conjunction with convertImage method and "OCR" = "true".
Specifies additional conversion parameters for convertImage method.
Syntax
NVDC.setParameter("AutoStraighten", value)
Data Type: String
Note: Will have effect only when used in conjunction with convertImage method.
Possible Values:
-useimagepack forces docCreator to use Image Pack for all image conversions - by default docCreator will use the built-in image parser for jpeg, png, bmp, pcx and tiff images and Image Pack for the rest.
-colorize <value> colorize the image with the fill color
Specify the amount of colorization as a percentage. You can apply separate colorization values to the red, green, and blue channels of the image with a colorization value list delimited with slashes (e.g. 0/0/50).
-colors <value> preferred number of colors in the image
The actual number of colors in the image may be less than your request, but never more. Note, this is a color reduction option. Images with less unique colors than specified with this option will have any duplicate or unused colors removed. The ordering of an existing color palette may be altered. When converting an image from color to grayscale, convert the image to the gray colorspace before reducing the number of colors since doing so is most efficient.
Note: -dither, -colorspace affect the color reduction algorithm.
-colorspace <value> colorspace type
Choices are: CMYK, GRAY, HSL, HWB, OHTA, RGB, Transparent, XYZ, YCbCr, YIQ, YPbPr, or YUV.
Color reduction, by default, takes place in the RGB color space. Empirical evidence suggests that distances in color spaces such as YUV or YIQ correspond to perceptual color differences more closely than do distances in RGB space. These color spaces may give better results when color reducing an image. Refer to quantize for more details.
The Transparent color space behaves uniquely in that it preserves the matte channel of the image if it exists. The -colors or -monochrome option, or saving to a file format which requires color reduction, is required for this option to take effect.
-compress <type> image compression type
Choices are: None, BZip, Fax, Group4, JPEG, LZW, RLE or Zip.
Specify +compress to store the binary image in an uncompressed format. The default is the compression type of the specified image file.
-contrast enhance or reduce the image contrast
This option enhances the intensity differences between the lighter and darker elements of the image. Use
-contrast to enhance the image or +contrast to reduce the image contrast. For a more pronounced effect you can repeat the option, for Ex: NVDC.setParameter( "ConvertImageParam", "-contrast -contrast")
-crop <width>x<height>{+-}<x>{+-} <y>{%} preferred size and location of the cropped image
See -geometry for details about the geometry specification.
The width and height give the size of the image that remains after cropping, and x and y are offsets that give the location of the top left corner of the cropped image with respect to the original image. To specify the amount to be removed, use -shave instead.
If the x and y offsets are present, a single image is generated, consisting of the pixels from the cropping region. The offsets specify the location of the upper left corner of the cropping region measured downward and rightward with respect to the upper left corner of the image.
If the x and y offsets are omitted, a set of tiles of the specified geometry, covering the entire input image, is generated. The rightmost tiles and the bottom tiles are smaller if the specified geometry extends beyond the dimensions of the input image
-dither apply Floyd/Steinberg error diffusion to the image
The basic strategy of dithering is to trade intensity resolution for spatial resolution by averaging the intensities of several neighboring pixels. Images which suffer from severe contouring when reducing colors can be improved with this option.
The -colors or -monochrome option is required for this option to take effect.
-density <width>x<height> horizontal and vertical resolution in pixels of the image
This option specifies the image resolution to store while encoding a raster image. The default unit of measure is in dots per inch (DPI).
The default resolution is 72 dots per inch, which is equivalent to one point per pixel (Macintosh and Postscript standard). Computer screens are normally 72 or 96 dots per inch while printers typically support 150, 300, 600, or 1200 dots per inch. To determine the resolution of your display, use a ruler to measure the width of your screen in inches, and divide by the number of horizontal pixels (1024 on a 1024x768 display).
If the file format supports it, this option may be used to update the stored image resolution. Note that Photoshop stores and obtains image resolution from a proprietary embedded profile. If this profile is not stripped from the image, then Photoshop will continue to treat the image using its former resolution, ignoring the image resolution specified in the standard file header.
The density option is an attribute and does not alter the underlying raster image. It may be used to adjust the rendered size for desktop publishing purposes by adjusting the scale applied to the pixels. To resize the image so that it is the same size at a different resolution, use the -resample option.
-depth <value> depth of the image
This is the number of bits in a color sample within a pixel. The only acceptable values are 8 or 16. Use this option to specify the depth of raw images whose depth is unknown such as GRAY, RGB, or CMYK, or to change the depth of any image after it has been read.
-filter <type> use this type of filter when resizing an image
Use this option to affect the resizing operation of an image (see -geometry). Choose from these filters: Point, Box, Triangle, Hermite, Hanning, Hamming, Blackman, Gaussian, Quadratic, Cubic, Catrom, Mitchell, Lanczos, Bessel and Sinc.
The default filter is automatically selected to provide the best quality while consuming a reasonable amount of time. The Mitchell filter is used if the image supports a palette, supports a matte channel, or is being enlarged, otherwise the Lanczos filter is used.
-geometry <width>x<height>{+-}<x>{+-} <y>{%}{@} {!}{<}{>} preferred size and location of the Image
By default, the width and height are maximum values. That is, the image is expanded or contracted to fit the width and height value while maintaining the aspect ratio of the image. Append an exclamation point to the geometry to force the image size to exactly the size you specify. For example, if you specify 640x480! the image width is set to 640 pixels and height to 480.
If only the width is specified, the width assumes the value and the height is chosen to maintain the aspect ratio of the image. Similarly, if only the height is specified (e.g., -geometry x256), the width is chosen to maintain the aspect ratio.
To specify a percentage width or height instead, append %. The image size is multiplied by the width and height percentages to obtain the final image dimensions. To increase the size of an image, use a value greater than 100 (e.g. 125%). To decrease an image's size, use a percentage less than 100.
Use @ to specify the maximum area in pixels of an image.
Use > to change the dimensions of the image only if its width or height exceeds the geometry specification. < resizes the image only if both of its dimensions are less than the geometry specification. For example, if you specify '640x480>' and the image size is 256x256, the image size does not change. However, if the image is 512x512 or 1024x1024, it is resized to 480x480. Enclose the geometry specification in quotation marks to prevent the < or > from being interpreted by your shell as a file redirection.
-monochrome transform the image to black and white
-page <width>x<height>{+-}<x>{+-} <y>{%}{!}{<}{>} size and location of an image canvas
For convenience you can specify the page size by media (e.g. A4, Ledger, etc.). Otherwise, -page behaves much like -geometry (e.g. -page letter+43+43>).
This option is also used to place subimages when writing to a multi-image format that supports offsets, such as GIF89 and MNG. When used for this purpose the offsets are always measured from the top left corner of the canvas and are not affected by the -gravity option. To position a GIF or MNG image, use -page{+-}<x>{+-}<y> (e.g. -page +100+200). When writing to a MNG file, a -page option appearing ahead of the first image in the sequence with nonzero width and height defines the width and height values that are written in the MHDR chunk. Otherwise, the MNG width and height are computed from the bounding box that contains all images in the sequence. When writing a GIF89 file, only the bounding box method is used to determine its dimensions.
For a PostScript page, the image is sized as in -geometry and positioned relative to the lower left hand corner of the page by {+-}<xoffset>{+-}<y offset>. Use -page 612x792>, for example, to center the image within the page. If the image size exceeds the PostScript page, it is reduced to fit the page. The default page dimensions for a TEXT image is 612x792.
This option is used in concert with -density.
Use +page to remove the page settings for an image.
-quality <value> JPEG/MIFF/PNG compression level
For the JPEG image format, quality is 0 (lowest image quality and highest compression) to 100 (best quality but least effective compression). The default quality is 75. Use the -sampling-factor option to specify the factors for chroma downsampling.
For the MIFF image format, quality/10 is the zlib compression level, which is 0 (worst but fastest compression) to 9 (best but slowest). It has no effect on the image appearance, since the compression is always lossless.
For the JPEG-2000 image format, quality is mapped using a non-linear equation to the compression ratio required by the Jasper library. This non-linear equation is intended to loosely approximate the quality provided by the JPEG v1 format. The default quality value 75 results in a request for 16:1 compression. The quality value 100 results in a request for non-lossy compression.
For the MNG and PNG image formats, the quality value sets the zlib compression level (quality / 10) and filter-type (quality % 10). Compression levels range from 0 (fastest compression) to 100 (best but slowest). For compression level 0, the Huffman-only strategy is used, which is fastest but not necessarily the worst compression.
The default is quality is 75, which means nearly the best compression with adaptive filtering. The quality setting has no effect on the appearance of PNG and MNG images, since the compression is always lossless.
For further information, see the PNG specification.
When writing a JNG image with transparency, two quality values are required, one for the main image and one for the grayscale image that conveys the alpha channel. These are written as a single integer equal to the main image quality plus 1000 times the opacity quality. For example, if you want to use quality 75 for the main image and quality 90 to compress the opacity data, use -quality 90075.
-region <width>x<height>{+-}<x>{+-} <y> apply options to a portion of the image
-resample <horizontal>x<vertical> resample image to specified horizontal and vertical resolution
Resize the image so that its rendered size remains the same as the original at the specified target resolution. For example, if a 300 DPI image renders at 3 inches by 2 inches on a 300 DPI device, when the image has been resampled to 72 DPI, it will render at 3 inches by 2 inches on a 72 DPI device. Note that only a small number of image formats (e.g. JPEG, PNG, and TIFF) are capable of storing the image resolution. For formats which do not support an image resolution, the original resolution of the image must be specified via -density on the command line prior to specifying the resample resolution.
Note that Photoshop stores and obtains image resolution from a proprietary embedded profile. If this profile exists in the image, then Photoshop will continue to treat the image using its former resolution, ignoring the image resolution specified in the standard file header.
-rotate <degrees>{<}{>} apply Paeth image rotation to the image
Use > to rotate the image only if its width exceeds the height. < rotates the image only if its width is less than the height. For example, if you specify -rotate "-90>" and the image size is 480x640, the image is not rotated. However, if the image is 640x480, it is rotated by -90 degrees. If you use > or <, enclose it in quotation marks to prevent it from being misinterpreted as a file redirection.
-sampling-factor <horizontal_factor>x<vertical_factor> sampling factors used by JPEG encoder and YUV decoder/encoder.
This option specifies the sampling factors to be used by the JPEG encoder for chroma downsampling. If this option is omitted, the JPEG library will use its own default values. When reading or writing the YUV format, use
-sampling-factor 2x1 to specify the 4:2:2 downsampling method.
-scale <geometry> scale the image
See -geometry for details about the geometry specification. -scale uses a simpler, faster algorithm. Offsets, if present in the geometry string, are ignored.
-sharpen <radius>{x<sigma>} sharpen the image
Use a Gaussian operator of the given radius and standard deviation (sigma).
-shave <width>x<height>{%} shave pixels from the image edges
Specify the width of the region to be removed from both sides of the image and the height of the regions to be removed from top and bottom.
-trim trim an image
This option removes any edges that are exactly the same color as the corner pixels. Use -fuzz to make trim remove edges that are nearly the same color as the corner pixels.
-fuzz <distance>{%} colors within this distance are considered equal
A number of algorithms search for a target color. By default the color must be exact. Use this option to match colors that are close to the target color in RGB space. For example, if you want to automatically trim the edges of an image with -trim but the image was scanned and the target background color may differ by a small amount. This option can account for these differences.
The distance can be in absolute intensity units or, by appending "%", as a percentage of the maximum possible intensity (255, 65535, or 4294967295).
Appendix A: Stamp File Format
Stamp file contains commands and text to be stamped into the PDF file. Commands are used to set certain attributes (like font, color etc).
Rules:
- Every command begins with a backslash (\) (there is no space after that);
- Case sensitivity is not relevant;
- Command and parameters are separated by spaces.
\stamp <value> - starts a stamp. <value> specifies the pages to stamp (leave blank if you want to stamp all the pages.
\stampname <value> - specifies the stamp name
\text <value> - specifies the text to stamp
\starttextbox <value> - Starts a Text Box (<value> is the text alignment: 1 - left, 2 - right, 3 - center)
.. text box text to stamp …
\endtextbox
\textrenderingmode <value> - specifies text rendering mode
\textgraycolor <value> - specifies text color (Gray colorspace)
\textrgbcolor <value> specifies text color (RGB colorpsace)
\textcmykcolor <value> - specifies text color (CMYK colorspace)
\strokegraycolor <value> - specifies stroke color (Gray colorspace)
\strokergbcolor <value> - specifies stroke color (RGB colorspace)
\strokecmykcolor <value> - specifies stroke color (CMYK colorspace)
\strokewidth <value> - specifies stroke width
\font <value> - specifies font name or font file
\fontsize <value> - specifies font size
\fontembed <value> - specifies if the font should be embedded or not
\fontsubset <value> - specifies if the font should be subsetted or not
\width <value> - specifies image or textbox width
\height <value> - specifies image or textbox height
\linespacing <value> - specifies line spacing for TextBox stamp
\image <value> - specifies image file to use as stamp
\importpdfpage <value> - specifies PDF file to use as PDF overlay stamp
\scale <value> - specifies scaling factor for image and PDF overlay stamps
\overlay - place stamp as overlay - over page content
\underlay - place stamp as watermark - behind page content
\canunstamp - stamp can be removed by the UnStampPDF method in the neeviaPDF PDFstamp COM object
\rotate <value> - rotate stamp by <value> degrees
\opacity <value> - specifies stamp opacity
\x <value> - specifies stamp’s X coordinate
\y <value> - specifies stamp’s Y coordinate
\units <value> - specifies the measurement units for \x, \y commands
Examples:
1. Stamp "WATERMARK" on first page at (1in, 1.5in), Arial font, green color
\stamp 1
\stampname Sample Stamp
\text WATERMARK
\x 1
\y 1.5
\units 1
\font Arial
\textrgbcolor #00FF00
2. Add bates numbering (5 digits) to each page at the bottom, Arial font, green color.
\stamp 0
\stampname Sample Stamp
\text %BATES#DIGITS=5%
\x left
\y bottom
\units 1
\overlay
\font Arial
\textrgbcolor #00FF00
Appendix B: Variables supported by Text / TextBox stamps
Below is the list of variables supported by both Text and TextBox stamps:
%PAGE% - current page number
%PAGES% - total number of pages
%BATES#DIGITS=x#START=n% - bates numbering Ex: %BATES#DIGITS=5%. Default number: 6 digits.
%FILENAME% - name of the file
%WEEKDAY% - full weekday name
%WEEKDAY_SHORT% - abbreviated weekday name
%MONTH% - month number (1-12)
%MONTHNAME% - full month name
%MONTHNAME_SHORT% - abbreviated month name
%YEAR% - year with century (YYYY)
%YEAR_SHORT% - year without century (YY)
%DAY% - day of month
%DAY_YEAR% - day of the year (1 -366)
%HOUR% - hour (01- 12)
%HOURS% - hour (00-23)
%MINUTES% - minutes (00-59)
%SECONDS% - seconds (00-59)
%AMPM% - AM, PM
%DATE% - local date representation. Ex: 11/01/07
%TIME% - local time representation. Ex: 1:17:10 PM
%DATETIME% - local date and time
%AUTHOR% - document Author
%TITLE% - document Title
%SUBJECT% - document Subject
%KEYWORDS% - document Keywords
%N% - new line. This is valid for TextBox stamp only.
Appendix C: Paper sizes supported by PaperSize property
1 - Letter, 8 1/2 x 11 in.
2 - Letter Small, 8 1/2 x 11 in.
3 - Tabloid, 11 x 17 in.
4 - Ledger, 17 x 11 in.
5 - Legal, 8 1/2 x 14 in.
6 - Statement, 5 1/2 x 8 1/2 in.
7 - Executive, 7 1/2 x 10 1/2 in.
8 - A3, 297 x 420 mm
9 - A4, 210 x 297 mm
10 - A4 Small, 210 x 297 mm
11 - A5, 148 x 210 mm
12 - B4, 250 x 354 mm
13 - B5, 182 x 257 mm
14 - Folio, 8 1/2 x 13 in.
15 - Quarto, 215 x 275 mm
16 - 10 x 14 in.
17 - 11 x 17 in.
18 - Note, 8 1/2 x 11 in.
19 - Envelope #9, 3 7/8 x 8 7/8 in.
20 - Envelope #10, 4 1/8 x 9 1/2 in.
21 - Envelope #11, 4 1/2 x 10 3/8 in.
22 - Envelope #12, 4 1/2 x 11 in.
23 - Envelope #14, 5 x 11 1/2 in.
24 - C size sheet
25 - D size sheet
26 - E size sheet
27 - Envelope DL, 110 x 220 mm
29 - Envelope C3, 324 x 458 mm
30 - Envelope C4, 229 x 324 mm
28 - Envelope C5, 162 x 229 mm
31 - Envelope C6, 114 x 162 mm
32 - Envelope C65, 114 x 229 mm
33 - Envelope B4, 250 x 353 mm
34 - Envelope B5, 176 x 250 mm
35 - Envelope B6, 176 x 125 mm
36 - Envelope, 110 x 230 mm
37 - Envelope Monarch, 3 7/8 x 7 1/2 in.
38 - Envelope, 3 5/8 x 6 1/2 in.
39 - U.S. Standard Fanfold, 14 7/8 x 11 in.
40 - German Standard Fanfold, 8 1/2 x 12 in.
41 - German Legal Fanfold, 8 1/2 x 13 in.
Examples
Code samples for docCreator can be found here - https://neevia.com/support/examples/cr/